Cat® 툴 세트(고객 사은품)
Cat® 툴 세트(학생용)
정비사용 툴 세트, 117피스 세트
Cat® 장비를 편리하게 보관할 수 있는 Cat 툴 백으로 규준대 높이를 정확하게 조정할 수 있습니다.
확장형 채광 제품 장비용 Cat® 드리프트 세트 펀치
Cat® 툴 세트(정비소 기술자용)
Cat® Injector Harness Connector Removal Tool allows for the safe and efficient disconnection of connectors from fuel injectors, preventing damage
Cat® Duo-Cone Seal Installer is a tool used for the installation of Duo-Cone seals that ensures a secure fit and prevents leaks
Cat® Duo-Cone Seal Installer is a tool used for the installation of Duo-Cone seals that ensures a secure fit and prevents leaks
Cat® Crankshaft Oil Seal Installer Tool facilitates the installation of the crankshaft oil seal, ensuring a proper seal and preventing oil leaks
Cat® Grease Gun Tool Kit transfers high-pressure lubrication for equipment maintenance, providing proper grease application with adjustable flow control
Cat® Hand Tool Set (40 Tools)
Cat® Valve Seal Installation Tool facilitates the accurate and efficient installation of valve seals onto the inlet and exhaust valve guides
Cat® Braking Paddle Switch Grinder Tool Kit provides controlled grinding with enhanced safety and material removal in maintenance and fabrication work
65개 중1 - 16
이 부품은 제조업체 사양에 따라 사용하는 Cat 장비에 맞게 설계되었습니다.
제조업체 구성을 변경하면 제품이 사용하는 Cat 장비에 맞지 않을 수 있습니다. 이 부품이 사용하는 Cat 장비의 현재 상태 및 구성에 적합한지 확인하려면 구매하기 전에 Cat 특약점에 문의하십시오. 이 지시계는 모든 부품의 호환성을 보장할 수 없습니다.
재생
반품 불가
키트
교체 완료
높은 강도 및 내구성을 고려하여 제작된 Cat® 핸드 툴 세트는 기술자, 서비스 기술자 및 견습공에게 모든 작업에 알맞은 툴을 제공합니다.
광범위한 3/8인치, 1/2인치 및 3/4인치 드라이브 툴, 1/4~1 5/8인치 렌치, 조절 렌치 및 소켓, 플라이어, 펀치, 해머, 스크루 드라이버(Phillips 및 평면) 등을 확인하십시오.
툴 세트는 특정 Cat 장비 및 엔진을 위해 특별히 구성되었습니다. Cat 현장 툴 세트는 중장비에 사용하도록 설계되어 언제나 탁월한 성과를 보장합니다.
최고 품질의 개별 핸드 툴에는 다음을 포함한 Cat 수명 보증이 제공됩니다.
1-16/65 결과
1-16/65 결과
Cat
Weight (lb)
32.13
전체 폭(in)
21.65
전체 깊이(in)
4.72
전체 높이(in)
15.75
Material
Phenolic Plastic,Carbon Steel
Cat
Weight (lb)
61.736
Cat
Material
Carbon Steel
Cat
전체 폭(in)
8.0
표준 색상
검은색
자재 설명
코듀라 천
전체 높이(in)
6.25
색상
검은색
전체 길이(in)
24.0
Cat
Material
Carbon Steel
Cat
Material
Carbon Steel
Cat
Weight (lb)
0.606
Overall Height (in)
3.386
Overall Width (in)
2.886
Material
Coating Mixed: Nonmetallic,Carbon Steel,Alloy Mixed: Metal
Cat
Inner Diameter (in)
14.764
Width (in)
3.74
Internal Thread
1/4"-20
Thread
1/4"-20
Weight (lb)
2.341
Material
Polyurethane Plastic
Cat
Weight (lb)
3.287
Outer Diameter (in)
19.314
Material
Polyurethane Plastic
Cat
Inner Diameter (in)
1.378
Outer Diameter (in)
4.449
Width (in)
2.402
Material
Steel,Carbon Steel,Coating Mixed: Nonmetallic
Weight (lb)
6.828
Cat
Cat
Cat
Material
Steel,Low Alloy Steel,Coating Mixed: Nonmetallic
Weight (lb)
0.983
Length (in)
5.559
Outer Diameter (in)
0.984
Cat
Cat
Plug
1P-3020
Cat