Caterpillar
Brak sugerowanych wyników. Spróbuj ponownie.

Zarejestruj się

Caterpillar

Wybierz sprzęt

Wyszukaj numer katalogowy lub nazwę
Zarejestruj się

Caterpillar
Wyszukaj numer katalogowy lub nazwę

Wybierz sprzęt

Strona głównaElementy mocujące, uszczelnienia i materiały eksploatacyjneUszczelki, pierścienie i pierścienie O-ringPierścienie o-ring215-4124: POPYCHACZA
Strona główna
Elementy mocujące, uszczelnienia i materiały eksploatacyjneUszczelki, pierścienie i pierścienie O-ringPierścienie o-ring
215-4124: POPYCHACZA
215-4124: POPYCHACZA

Cat® 70mm Seal Inside Diameter Rubber Single Acting Piston Seal Used in Track Adjuster and Recoil Spring

Marka: Cat

Zdjęcia produktu
215-4124: POPYCHACZA
215-4124: POPYCHACZA

Cat® 70mm Seal Inside Diameter Rubber Single Acting Piston Seal Used in Track Adjuster and Recoil Spring

Marka: Cat

Informacje o gwarancji
Informacje o gwarancji

Zasadniczo gwarancja na części zakupione w witrynie Parts.Cat.Com wynosi 12 miesięcy od daty wystawienia faktury, zgodnie z definicją przedstawioną w Ograniczonej gwarancji Caterpillar. Gwarancja na części obejmuje wady materiałowe i produkcyjne w całym okresie gwarancji od momentu zainstalowania. W celu uzyskania pełnych informacji na temat gwarancji należy skontaktować się z lokalnym dealerem Cat.

Potrzebujesz dodatkowej pomocy? Skontaktuj się z nami

Znajdź dealeraE-mail
Zasady zwrotów
Informacje dotyczące polityki zwrotów
O ile nie zaznaczono inaczej za pomocą ikony części
niepodlegającej zwrotowi, większość części można zwrócić autoryzowanemu dealerowi Cat® zgodnie z polityką zwrotów.

Potrzebujesz dodatkowej pomocy? Skontaktuj się z nami

Znajdź dealeraE-mail
Opis
Opis

Description:
A Single Acting Piston Seal is designed to provide sealing in only one direction, typically from the high-pressure side of the piston to the low-pressure side. When pressure is applied to the high-pressure side of the piston, the sealing element is pushed against the cylinder wall, creating a seal that prevents fluid from leaking past the piston. When pressure is released, the sealing element returns to its original position, allowing fluid to flow past the piston in the opposite direction. It is placed in a seal housing or groove and pressed against the piston rod or cylinder wall.

Attributes:
• High resistance to oils, solvents, and temperature.
• Seal is constructed with steel insert.
• Manufactured to precise specifications and are built for durability, reliability, and productivity.

Applications:
A Single Acting Piston Seal is used to provide a tight seal between the piston and cylinder wall to prevent the escape of fluids into the Track Adjuster And Recoil Spring, mostly used in Cat 320, 320D, 323D, 325, 325D, 329D, 330D, 336D, 345C, C6.6 and C7.1 OEM Applications, 323, 323F, 325C, 329E, 330, 330D and 330F Excavators.

Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z 1,3-butadienem, który w stanie Kalifornia jest uznawany za powodujący raka, wady wrodzone lub inne problemy układu rozrodczego. Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.

Description:
A Single Acting Piston Seal is designed to provide sealing in only one direction, typically from the high-pressure side of the piston to the low-pressure side. When pressure is applied to the high-pressure side of the piston, the sealing element is pushed against the cylinder wall, creating a seal that prevents fluid from leaking past the piston. When pressure is released, the sealing element returns to its original position, allowing fluid to flow past the piston in the opposite direction. It is placed in a seal housing or groove and pressed against the piston rod or cylinder wall.

Attributes:
• High resistance to oils, solvents, and temperature.
• Seal is constructed with steel insert.
• Manufactured to precise specifications and are built for durability, reliability, and productivity.

Applications:
A Single Acting Piston Seal is used to provide a tight seal between the piston and cylinder wall to prevent the escape of fluids into the Track Adjuster And Recoil Spring, mostly used in Cat 320, 320D, 323D, 325, 325D, 329D, 330D, 336D, 345C, C6.6 and C7.1 OEM Applications, 323, 323F, 325C, 329E, 330, 330D and 330F Excavators.

Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z 1,3-butadienem, który w stanie Kalifornia jest uznawany za powodujący raka, wady wrodzone lub inne problemy układu rozrodczego. Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.
Specyfikacje
Specyfikacje
Jednostki miaryUSAMetryczny
Material: Rubber,Nitrile / NBR / HNBR / XNBR Rubber
Outer Diameter (in): 3.94
Outer Diameter (mm): 100
Seal Inside Diameter (mm): 70
Weight (kg): 0.3
Weight (lb): 0.01
Width (in): 0.39
Width (mm): 10
Jednostki miaryUSAMetryczny
Material: Rubber,Nitrile / NBR / HNBR / XNBR Rubber
Outer Diameter (in): 3.94
Outer Diameter (mm): 100
Wyświetl więcej
Zgodne modele
Zgodne modele
Undercarriage
OEMS
Excavator
336D LN340MHPU345D
Mobile Hyd Power Unit
336F345D336E330D330D L336D L330C349D L352FMHPU
Wyświetl więcej
Undercarriage
OEMS
Informacje o gwarancji
Informacje o gwarancji

Zasadniczo gwarancja na części zakupione w witrynie Parts.Cat.Com wynosi 12 miesięcy od daty wystawienia faktury, zgodnie z definicją przedstawioną w Ograniczonej gwarancji Caterpillar. Gwarancja na części obejmuje wady materiałowe i produkcyjne w całym okresie gwarancji od momentu zainstalowania. W celu uzyskania pełnych informacji na temat gwarancji należy skontaktować się z lokalnym dealerem Cat.

Potrzebujesz dodatkowej pomocy? Skontaktuj się z nami

Znajdź dealeraE-mail
Zasady zwrotów
Informacje dotyczące polityki zwrotów
O ile nie zaznaczono inaczej za pomocą ikony części
niepodlegającej zwrotowi, większość części można zwrócić autoryzowanemu dealerowi Cat® zgodnie z polityką zwrotów.

Potrzebujesz dodatkowej pomocy? Skontaktuj się z nami

Znajdź dealeraE-mail
Schemat części do 215-4124
Wyświetl szczegółowe schematy części
Dodaj swój sprzęt
SchematOpisSpecyfikacjeZgodne modele
Schemat części do 215-4124
Wyświetl szczegółowe schematy części
Dodaj swój sprzęt
Opis numeru katalogowego 215-4124

Description:
A Single Acting Piston Seal is designed to provide sealing in only one direction, typically from the high-pressure side of the piston to the low-pressure side. When pressure is applied to the high-pressure side of the piston, the sealing element is pushed against the cylinder wall, creating a seal that prevents fluid from leaking past the piston. When pressure is released, the sealing element returns to its original position, allowing fluid to flow past the piston in the opposite direction. It is placed in a seal housing or groove and pressed against the piston rod or cylinder wall.

Attributes:
• High resistance to oils, solvents, and temperature.
• Seal is constructed with steel insert.
• Manufactured to precise specifications and are built for durability, reliability, and productivity.

Applications:
A Single Acting Piston Seal is used to provide a tight seal between the piston and cylinder wall to prevent the escape of fluids into the Track Adjuster And Recoil Spring, mostly used in Cat 320, 320D, 323D, 325, 325D, 329D, 330D, 336D, 345C, C6.6 and C7.1 OEM Applications, 323, 323F, 325C, 329E, 330, 330D and 330F Excavators.

Wyświetl więcej
Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z 1,3-butadienem, który w stanie Kalifornia jest uznawany za powodujący raka, wady wrodzone lub inne problemy układu rozrodczego. Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.
Specyfikacje części o numerze katalogowym 215-4124

Jednostki miary

USAMetryczny
Material: Rubber,Nitrile / NBR / HNBR / XNBR Rubber
Outer Diameter (in): 3.94
Outer Diameter (mm): 100
Seal Inside Diameter (mm): 70
Weight (kg): 0.3
Weight (lb): 0.01
Width (in): 0.39
Width (mm): 10
Wyświetl więcej
Modele, do których pasuje część o numerze katalogowym 215-4124

UNDERCARRIAGE

OEMS

EXCAVATOR

336D LN 340MHPU 345D

MOBILE HYD POWER UNIT

336F 345D 336E 330D 330D L 336D L 330C 349D L 352FMHPU

Wyświetl więcej
LegendaLegenda
Wyposażenie fabryczne

Ta część została zaprojektowana tak, aby pasowała do sprzętu Cat na podstawie specyfikacji producenta.

Wszelkie zmiany konfiguracji producenta mogą spowodować, że produkt nie będzie pasował do sprzętu Cat. Aby upewnić się, że ta część jest odpowiednia do danego sprzętu Cat w bieżącym stanie i przyjętej konfiguracji, skontaktuj się z dealerem Cat. Ten wskaźnik nie gwarantuje zgodności wszystkich części.

Regenerowane

Niepodlegające zwrotowi

Zestaw

Wymienione

Regenerowane

Niepodlegające zwrotowi

Zestaw

Wymienione

Skorzystaj z czatu z ekspertem