NEEMBA INTERNATIONAL LTD

Wybierz sprzęt

Wybierz sprzęt, aby wyświetlić pasujące do niego części.
Brak sugerowanych wyników. Spróbuj ponownie.

Zarejestruj się

NEEMBA INTERNATIONAL LTD

Wybierz sprzęt

Dodaj Maszynę

Aby znaleźć pasujące części.Aby znaleźć pasujące części.
Wyszukaj numer katalogowy lub nazwę
Strona głównaKonstrukcje i inne elementy systemówKonstrukcje ciężkiej ramy i korpusuInne ciężkie konstrukcje342-8368: ZESPÓŁ TULEI PRAWY
Strona główna
Konstrukcje i inne elementy systemówKonstrukcje ciężkiej ramy i korpusuInne ciężkie konstrukcje
342-8368: ZESPÓŁ TULEI PRAWY
342-8368: ZESPÓŁ TULEI PRAWY

Cat® 50.8mm Outer Diameter Sleeve used on Right Hand Side of Screed Mat Thickness Control

Marka: Cat

Zdjęcia produktu
342-8368: ZESPÓŁ TULEI PRAWY
342-8368: ZESPÓŁ TULEI PRAWY
342-8368: ZESPÓŁ TULEI PRAWY
342-8368: ZESPÓŁ TULEI PRAWY
342-8368: ZESPÓŁ TULEI PRAWY

Cat® 50.8mm Outer Diameter Sleeve used on Right Hand Side of Screed Mat Thickness Control

Marka: Cat

Dodaj sprzęt, aby sprawdzić, czy ta część pasuje lub są dostępne opcje naprawy.
Czy będzie pasować?Dodaj sprzęt, aby sprawdzić, czy ta część pasuje lub są dostępne opcje naprawy.
Dodaj maszynę
Chcesz sprawdzić dopasowanie lub szukasz naprawy? Dodaj sprzęt, aby sprawdzić, czy ta część pasuje lub są dostępne opcje naprawy.
Skontaktuj się z dealerem
Odwiedź sklep:

albo użyj strony Formularz kontaktu
Zapisz na liście

Szczegóły i ustawienia listy
Przypisz sprzęt (opcja)
Nie masz sprzętu przypisanego do konta. Dodaj sprzęt, korzystając z funkcji Mój sprzęt.

Widoczność listy
Domyślnie listy są prywatne. Aby udostępnić innym osobom w organizacji, ustaw listę jako publiczną.
Publiczne

Obsługiwane typy plików:

.csv (próbka),

.xlsx (próbka).

Przeglądanie
Utwórz i zapiszAnuluj
Informacje o gwarancji
Zasady zwrotów
Opis
Opis

The Sleeve is designed to provide precise control over the thickness of the Screed Mat during asphalt paving operations. It ensures that the mat is laid to the desired thickness, contributing to the smoothness and quality of the finished pavement. The Threaded Rod is rotated in a counterclockwise direction to make adjustments to the Sleeve. Counterclockwise rotation of the rod results in the rod moving upward, causing the sleeve to move vertically, thereby altering the thickness of the Screed Mat. The assembly consists of parts like Tubes, bosses, and Plates.

Attributes:
• Designed to withstand the forces and vibrations
• Acts as a guide and support for other parts
• The threaded rod used in the Sleeve is a 1-8 ACME threaded rod and the 1-8 specification refers to the thread pitch, which means there is 1 thread per 8 units of length

Applications:
The Sleeve is used on the Right Hand Side of the Screed Mat Thickness Control is adjusted and controlled by the operator of the asphalt paving equipment and the operator monitors and adjusts the sleeve assembly settings based on the desired Screed Mat Thickness, and paving conditions.

Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z ołowiem i jego związkami, które w stanie Kalifornia są uznawane za powodujące raka, wady wrodzone lub inne problemy układu rozrodczego Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.

The Sleeve is designed to provide precise control over the thickness of the Screed Mat during asphalt paving operations. It ensures that the mat is laid to the desired thickness, contributing to the smoothness and quality of the finished pavement. The Threaded Rod is rotated in a counterclockwise direction to make adjustments to the Sleeve. Counterclockwise rotation of the rod results in the rod moving upward, causing the sleeve to move vertically, thereby altering the thickness of the Screed Mat. The assembly consists of parts like Tubes, bosses, and Plates.

Attributes:
• Designed to withstand the forces and vibrations
• Acts as a guide and support for other parts
• The threaded rod used in the Sleeve is a 1-8 ACME threaded rod and the 1-8 specification refers to the thread pitch, which means there is 1 thread per 8 units of length

Applications:
The Sleeve is used on the Right Hand Side of the Screed Mat Thickness Control is adjusted and controlled by the operator of the asphalt paving equipment and the operator monitors and adjusts the sleeve assembly settings based on the desired Screed Mat Thickness, and paving conditions.

Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z ołowiem i jego związkami, które w stanie Kalifornia są uznawane za powodujące raka, wady wrodzone lub inne problemy układu rozrodczego Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.
Specyfikacje
Specyfikacje
Material: Alloy Steel
Material: Alloy Steel
Wyświetl więcej
Zgodne modele
Zgodne modele
Asphalt Paver
AP500AP-1000EAP-1055EBG1000EBG1055EPE636SE47
Asphalt Screed
SE47 FMSE60 FMSE60AS2302C
Wyświetl więcej
Asphalt Paver
AP500AP-1000EAP-1055EBG1000EBG1055EPE636SE47
Informacje o gwarancji
Zasady zwrotów
Schemat części do 342-8368
Wyświetl szczegółowe schematy części
Dodaj swój sprzęt
SchematOpisSpecyfikacjeZgodne modele
Schemat części do 342-8368
Wyświetl szczegółowe schematy części
Dodaj swój sprzęt
Opis numeru katalogowego 342-8368

The Sleeve is designed to provide precise control over the thickness of the Screed Mat during asphalt paving operations. It ensures that the mat is laid to the desired thickness, contributing to the smoothness and quality of the finished pavement. The Threaded Rod is rotated in a counterclockwise direction to make adjustments to the Sleeve. Counterclockwise rotation of the rod results in the rod moving upward, causing the sleeve to move vertically, thereby altering the thickness of the Screed Mat. The assembly consists of parts like Tubes, bosses, and Plates.

Attributes:
• Designed to withstand the forces and vibrations
• Acts as a guide and support for other parts
• The threaded rod used in the Sleeve is a 1-8 ACME threaded rod and the 1-8 specification refers to the thread pitch, which means there is 1 thread per 8 units of length

Applications:
The Sleeve is used on the Right Hand Side of the Screed Mat Thickness Control is adjusted and controlled by the operator of the asphalt paving equipment and the operator monitors and adjusts the sleeve assembly settings based on the desired Screed Mat Thickness, and paving conditions.

Wyświetl więcej
Ostrzeżenie:Ten produkt może narażać użytkownika na kontakt z różnymi substancjami chemicznymi, w tym z ołowiem i jego związkami, które w stanie Kalifornia są uznawane za powodujące raka, wady wrodzone lub inne problemy układu rozrodczego Więcej informacji można znaleźć na stronie www.P65Warnings.ca.gov.
Specyfikacje części o numerze katalogowym 342-8368
Material: Alloy Steel
Wyświetl więcej
Modele, do których pasuje część o numerze katalogowym 342-8368

ASPHALT PAVER

AP500 AP-1000E AP-1055E BG1000E BG1055E PE636 SE47

ASPHALT SCREED

SE47 FM SE60 FM SE60 AS2302C

Wyświetl więcej
LegendaLegenda
Wyposażenie fabryczne

Ta część została zaprojektowana tak, aby pasowała do sprzętu Cat na podstawie specyfikacji producenta.

Wszelkie zmiany konfiguracji producenta mogą spowodować, że produkt nie będzie pasował do sprzętu Cat. Aby upewnić się, że ta część jest odpowiednia do danego sprzętu Cat w bieżącym stanie i przyjętej konfiguracji, skontaktuj się z dealerem Cat. Ten wskaźnik nie gwarantuje zgodności wszystkich części.

Regenerowane

Niepodlegające zwrotowi

Zestaw

Wymienione

Regenerowane

Niepodlegające zwrotowi

Zestaw

Wymienione

Skorzystaj z czatu z ekspertem