NEEMBA INTERNATIONAL LTD

Избор на оборудване

Изберете оборудване, за да видите частите, които са подходящи за вашето оборудване.
Няма предложени резултати. Опитайте отново.

Регистрация

NEEMBA INTERNATIONAL LTD

Избор на оборудване

Добавяне на оборудване

За да откриете частите, които пасват.За да откриете частите, които пасват.
Търсене по каталожен номер или име
НачалоХодова частКомпоненти за веригиЩифтове за верига619-3910: Монтажен щифт за верига с външен диаметър 99 мм
Начало
Ходова частКомпоненти за веригиЩифтове за верига
619-3910: Монтажен щифт за верига с външен диаметър 99 мм
619-3910: Монтажен щифт за верига с външен диаметър 99 мм

Свързващ щифт Cat®, външен диаметър X Д: 85 X 224 мм

Марка: Cat

Изображения на продукти
619-3910: Монтажен щифт за верига с външен диаметър 99 мм
619-3910: Монтажен щифт за верига с външен диаметър 99 мм
619-3910: Монтажен щифт за верига с външен диаметър 99 мм
619-3910: Монтажен щифт за верига с външен диаметър 99 мм
619-3910: Монтажен щифт за верига с външен диаметър 99 мм

Свързващ щифт Cat®, външен диаметър X Д: 85 X 224 мм

Марка: Cat

Свържете се с търговеца
Посетете ни

или използвайте нашия Формуляр за контакти
Записано в списък

Детайли и настройки на списъка
Свързване на оборудването (по избор)
Нямате оборудване, свързано с вашия акаунт. Добавете оборудване, като посетите „Моето оборудване“.

Видимост на списъка
Списъците по подразбиране са лични. Задайте на публично, за да споделите с членове на вашата организация.
Публичен

Поддържани типове файлове:

.csv (пример),

.xlsx (пример).

Разглеждане
Създаване и записванеОтмяна
Информация за гаранцията
Политика за връщане
Описание
Описание

Description:
Cat Machine Linkage Pins such as part # 619-3910 support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Attributes:
• Headed Pin
• Material: Steel
• Pin Diameter: 85mm (3.346 in)
• Effective length: 224mm (8.82 in)

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Предупреждение:Този продукт може да ви изложи на химически вещества, включващи арсен, за който е известно в щата Калифорния, че причинява рак и родилни дефекти или репродуктивни увреждания. За повече информация посетете www.P65Warnings.ca.gov.

Description:
Cat Machine Linkage Pins such as part # 619-3910 support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Attributes:
• Headed Pin
• Material: Steel
• Pin Diameter: 85mm (3.346 in)
• Effective length: 224mm (8.82 in)

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Предупреждение:Този продукт може да ви изложи на химически вещества, включващи арсен, за който е известно в щата Калифорния, че причинява рак и родилни дефекти или репродуктивни увреждания. За повече информация посетете www.P65Warnings.ca.gov.
Спецификации
Спецификации
Мерна единицаСАЩМетрични
Дължина (инч): 8,82
Дължина (мм): 224
Материал: Стомана
Диаметър на щифт (инч): 3,35
Диаметър на щифт (мм): 85
Тип щифт: Щифт с глава
Помощ за отстраняване / функция: Без отвор за устройство за изтегляне
Overall Length (mm): 224
Master Option: No
Мерна единицаСАЩМетрични
Дължина (инч): 8,82
Дължина (мм): 224
Материал: Стомана
Вижте още
Съвместими модели
Съвместими модели
Hydraulic Shovel
6030
Вижте още
Hydraulic Shovel
6030
Информация за гаранцията
Политика за връщане
Диаграма на частите за 619-3910
Вижте подробни диаграми на части
Добавете вашето оборудване
ДиаграмаОписаниеСпецификацииСъвместими модели
Диаграма на частите за 619-3910
Вижте подробни диаграми на части
Добавете вашето оборудване
Описание за каталожен номер 619-3910

Description:
Cat Machine Linkage Pins such as part # 619-3910 support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Attributes:
• Headed Pin
• Material: Steel
• Pin Diameter: 85mm (3.346 in)
• Effective length: 224mm (8.82 in)

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Вижте още
Предупреждение:Този продукт може да ви изложи на химически вещества, включващи арсен, за който е известно в щата Калифорния, че причинява рак и родилни дефекти или репродуктивни увреждания. За повече информация посетете www.P65Warnings.ca.gov.
Спецификации за каталожен номер 619-3910

Мерна единица

САЩМетрични
Дължина (инч): 8,82
Дължина (мм): 224
Материал: Стомана
Диаметър на щифт (инч): 3,35
Диаметър на щифт (мм): 85
Тип щифт: Щифт с глава
Помощ за отстраняване / функция: Без отвор за устройство за изтегляне
Overall Length (mm): 224
Master Option: No
Вижте още
Съвместими модели за каталожен номер 619-3910

HYDRAULIC SHOVEL

6030

Вижте още
КлючКлюч
Фабрично пасване

Тази част е проектирана да пасва на вашето оборудване Cat въз основа на спецификациите на производителя.

Всички промени в конфигурацията на производителя може да доведат до това продуктът да не пасва на вашето оборудване Cat. Моля, консултирайте се с вашия търговец на Cat, преди да закупите, за да се уверите, че тази част е подходяща за вашето оборудване Cat в настоящото му състояние и предполагаема конфигурация. Този индикатор не може да гарантира съвместимост за всички части.

Фабрично възстановена

Не подлежи на връщане

Комплект

Заменено

Фабрично възстановена

Не подлежи на връщане

Комплект

Заменено

Чат с експерт