329-5409: IDLER GP

홈

329-5409: IDLER GP

Cat® Idler Group Standard Application, 232mm Rim Width, Interchangeable, 698mm Tread Diameter, Conventional Tread

브랜드: Cat

제품 이미지

329-5409: IDLER GP

Cat® Idler Group Standard Application, 232mm Rim Width, Interchangeable, 698mm Tread Diameter, Conventional Tread

브랜드: Cat

이것이 적합할까요? 아니면 수리가 필요하신가요? 이 부품이 적합하거나 수리 옵션이 있는지 알아보려면 장비를 추가하십시오.

가격 확인

로그인 후 판매가 확인하기

보증 정보

반품 정책

설명

Description:

Idlers guide the track in and out of the track rollers. They intermittently support the machine's weight and provide a way to control track slack and tension.

Attributes:

SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
Center tread idlers run on the bushing rather than track link rails. They are used exclusively on SystemOne™ and Rotating Bushing Track where the bushing rotates.

경고:본 제품은 납 및 납 화합물을 포함한 화학 물질에 노출될 수 있다. 납 및 납 화합물은 캘리포니아 주에서 암과 선천성 기형 또는 기타 생식 장애를 유발하는 것으로 알려져 있다. 자세한 내용은 www.P65Warnings.ca.gov를 참조하십시오.

Description:

Idlers guide the track in and out of the track rollers. They intermittently support the machine's weight and provide a way to control track slack and tension.

Attributes:

SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
Center tread idlers run on the bushing rather than track link rails. They are used exclusively on SystemOne™ and Rotating Bushing Track where the bushing rotates.

사양

Undercarriage Width (mm):

460

Shaft Diameter (mm):

Bolt Size (mm):

7/16

Application:

Standard Application

Machine Side:

Interchangeable

Bolt Size (in):

7/16

Tread Diameter (mm):

698

Shaft OD (in):

4.99

Shaft OD (mm):

126.75

Center Flange Width (mm):

88.69

UC System:

Shaft Protrusion Length (mm):

61.92

Center Flange Width (in):

3.492

Flange Diameter (mm):

786

Shaft Protrusion Length (in):

2.438

Idler Rim Width (in):

9.134

Center Flange Diameter (mm):

738

Idler Rim Width (mm):

232

Flange Diameter (in):

30.9

Tread Diameter (in):

27.48

Tread Type:

Conventional Tread

Diameter (mm):

786

Shaft Length (mm):

460

Flange Type:

Center Flange

Shaft Length (in):

18.11

Center Flange Diameter (in):

29.055

호환 모델

Track-Type Tractor

보증 정보

반품 정책

329-5409용 부품 다이어그램

다이어그램

설명

사양

호환 모델

329-5409용 부품 다이어그램

부품 번호 329-5409에 대한 설명

Description:

Idlers guide the track in and out of the track rollers. They intermittently support the machine's weight and provide a way to control track slack and tension.

Attributes:

SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
Center tread idlers run on the bushing rather than track link rails. They are used exclusively on SystemOne™ and Rotating Bushing Track where the bushing rotates.

부품 번호 329-5409 사양

측정 단위

미국

미터법

Undercarriage Width (mm):

460

Shaft Diameter (mm):

Bolt Size (mm):

7/16

Application:

Standard Application

Machine Side:

Interchangeable

Bolt Size (in):

7/16

Tread Diameter (mm):

698

Shaft OD (in):

4.99

Shaft OD (mm):

126.75

Center Flange Width (mm):

88.69

UC System:

Shaft Protrusion Length (mm):

61.92

Center Flange Width (in):

3.492

Flange Diameter (mm):

786

Shaft Protrusion Length (in):

2.438

Idler Rim Width (in):

9.134

Center Flange Diameter (mm):

738

Idler Rim Width (mm):

232

Flange Diameter (in):

30.9

Tread Diameter (in):

27.48

Tread Type:

Conventional Tread

Diameter (mm):

786

Shaft Length (mm):

460

Flange Type:

Center Flange

Shaft Length (in):

18.11

Center Flange Diameter (in):

29.055

부품 번호 329-5409의 호환 가능 모델

TRACK-TYPE TRACTOR

D8T D8R

대체 부품 비교

329-5409: IDLER GP

Bolt Size (in)

7/16

Shaft OD (in)

4.99

Center Flange Width (in)

3.492

설명

Cat® Idler Group Standard Application, 232mm Rim Width, Interchangeable, 698mm Tread Diameter, Conventional Tread

244-1323: 738mm 외경 트랙 아이들러

트레드 직경(in)

27.48

플랜지 직경(in)

29.1

볼트 크기(in)

7/16

설명

Cat® 트랙 아이들러 698 트레드 직경 언더캐리지 트랙 프레임에 사용

244-0879: Arctic Track Idler Group

Bolt Size (in)

7/16

Shaft OD (in)

4.99

Center Flange Width (in)

3.492

설명

Cat® Idler Group Arctic Application, 232mm Rim Width, Interchangeable, 698mm Tread Diameter, Conventional Tread

111-1730: 738mm 외경 트랙 아이들러

길이(인치)

2.677

트레드 직경(in)

27.48

축 직경(in)

설명

Cat® 트랙 아이들러 698 트레드 직경 언더캐리지 트랙 프레임에 사용

415-6134: 트랙 아이들러 그룹

Center Flange Diameter (in)

29.055

트레드 직경(in)

27.48

Center Flange Width (in)

3.492

설명

일반 부하 작업용 아이들러