Caterpillar

Velg utstyr

Velg utstyr for å se deler som passer til ditt utstyr.
Ingen foreslåtte resultater. Prøv igjen.

Registrer

Caterpillar

Velg utstyr

Legg til utstyr

for å finne deler som passer.for å finne deler som passer.
Søk etter delenummer eller -navn
HjemFesteutstyr, tetninger og forbruksdelerLagre og fôringerHylser613-5783: Sleeve Bearing
Hjem
Festeutstyr, tetninger og forbruksdelerLagre og fôringerHylser
613-5783: Sleeve Bearing
613-5783: Sleeve Bearing

Cat® 100mm Outside Diameter Straight Sleeve Bearing for Arm Lift

Merke: Cat

Produktbilder
613-5783: Sleeve Bearing
613-5783: Sleeve Bearing
613-5783: Sleeve Bearing
613-5783: Sleeve Bearing
613-5783: Sleeve Bearing

Cat® 100mm Outside Diameter Straight Sleeve Bearing for Arm Lift

Merke: Cat

Sjekk pris
Sjekk pris
Logg deg på for å vise kundeprisen
Garantiinformasjon
Returpolicy
Beskrivelse
Beskrivelse

A Straight Sleeve Bearing is a sliding contact bearing in which the surface of the shaft slides over the surface of the bush. It consists of a cylindrical sleeve with a smooth inner surface that allows a shaft to rotate inside it with minimal friction. The angle of contact of the bearing with the journal is 3600, therefore, it is a full journal bearing. With the addition of lubrication, sleeve bearings offer a low coefficient of friction and provide excellent wear resistance.

Attributes:
• Designed to minimize friction between the shaft and the bearing surface
• Can accommodate misalignment between the shaft and the bearing surface
• Compact, lightweight and easy to install
• Possesses high shock load resistance, minimize vibration (and therefore noise)

Applications:
A Straight Sleeve Bearing is suitable for applications where press fitting into a housing bore is the most practical bearing retention method. These are used in crankshaft bearings in petrol and diesel engines, centrifugal pumps and large size electric motors.

Advarsel:Kreft og forplantningsskade – www.P65Warnings.ca.gov

A Straight Sleeve Bearing is a sliding contact bearing in which the surface of the shaft slides over the surface of the bush. It consists of a cylindrical sleeve with a smooth inner surface that allows a shaft to rotate inside it with minimal friction. The angle of contact of the bearing with the journal is 3600, therefore, it is a full journal bearing. With the addition of lubrication, sleeve bearings offer a low coefficient of friction and provide excellent wear resistance.

Attributes:
• Designed to minimize friction between the shaft and the bearing surface
• Can accommodate misalignment between the shaft and the bearing surface
• Compact, lightweight and easy to install
• Possesses high shock load resistance, minimize vibration (and therefore noise)

Applications:
A Straight Sleeve Bearing is suitable for applications where press fitting into a housing bore is the most practical bearing retention method. These are used in crankshaft bearings in petrol and diesel engines, centrifugal pumps and large size electric motors.

Advarsel:Kreft og forplantningsskade – www.P65Warnings.ca.gov
Spesifikasjoner
Spesifikasjoner
MåleenheterUSMetrisk
Material: Alloy Copper
MåleenheterUSMetrisk
Material: Alloy Copper
Vis flere
Kompatible modeller
Kompatible modeller
Industrial Loader
415F2 IL
Backhoe Loader
415416420XE430420
Vis flere
Industrial Loader
415F2 IL
Garantiinformasjon
Returpolicy
Delediagram for 613-5783
Vis detaljerte delediagrammer
Legg til ditt utstyr
Ofte kjøpt sammen
613-5783613-5783
9R-58289R-5828
358-1472358-1472
Se alle deler
NøkkelNøkkel
Fabrikktilpasning

Denne delen er konstruert for å passe til Cat-utstyret ditt basert på produsentens spesifikasjoner.

Enhver endring i produsentens konfigurasjon kan føre til at produktet kanskje ikke passer til Cat-utstyret ditt. Snakk med Cat-forhandleren din før du handler for å sørge for at denne delen passer Cat-utstyret ditt i sin nåværende tilstand og antatte konfigurasjon. Denne indikatoren kan ikke garantere at alle delene er kompatible.

Nyprodusert

Ikke-returnerbar

Sett

Byttet

Nyprodusert

Ikke-returnerbar

Sett

Byttet

Chat med en ekspert