Caterpillar

Chọn thiết bị

Chọn thiết bị để xem các linh kiện phù hợp với thiết bị của bạn.
Không có kết quả đề xuất. Thử lại.
Đăng ký
Caterpillar

Thêm Thiết bị

Để tìm các bộ phận ăn khớpĐể tìm các bộ phận ăn khớp
Tìm số bộ phận hoặc tên

Chọn thiết bị

Trang chủ308-4366: IDLER GP TRK
Trang chủ308-4366: IDLER GP TRK
308-4366: IDLER GP TRK

Cat® Idler Gp-Track

Nhãn hiệu: Cat

Hình ảnh Sản phẩm
308-4366: IDLER GP TRK
308-4366: IDLER GP TRK
Liên hệ đại lý của bạn để có các lựa chọn thay thế.

Cat® Idler Gp-Track

Nhãn hiệu: Cat

NGƯNG SẢN XUẤT
Thông Tin Bảo Hành
chính sách hoàn trả
Mô tả
Mô tả

Description:

  • Idlers guide the track in and out of the track rollers. They intermittently support the machine's weight and provide a way to control track slack and tension.


Attributes:

  • SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
  • Center tread idlers run on the bushing rather than track link rails. They are used exclusively on SystemOne™ and Rotating Bushing Track where the bushing rotates.
  • Landfill idlers contain special protection around the shaft to restrict materials from entering the sealing system.

Description:

  • Idlers guide the track in and out of the track rollers. They intermittently support the machine's weight and provide a way to control track slack and tension.


Attributes:

  • SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
  • Center tread idlers run on the bushing rather than track link rails. They are used exclusively on SystemOne™ and Rotating Bushing Track where the bushing rotates.
  • Landfill idlers contain special protection around the shaft to restrict materials from entering the sealing system.

Thông số kỹ thuật
Thông số kỹ thuật
Đơn vị đoMỹHệ Mét
Tread Diameter (in): 30,9
Flange Type: Center Flange
Shaft Diameter (mm): 68
Tread Diameter (mm): 786
Diameter (mm): 786
Flange Diameter (mm): 786
Bolt Size (in): 7/16
Undercarriage Width (mm): 460
Flange Diameter (in): 30,9
Bolt Size (mm): 7/16
Đơn vị đoMỹHệ Mét
Tread Diameter (in): 30,9
Flange Type: Center Flange
Shaft Diameter (mm): 68
Xem Thêm
Các kiểu tương thích
Các kiểu tương thích
Máy Kéo Loại BáNh XíCh
D8TD8R
Xem Thêm
Máy Kéo Loại BáNh XíCh
D8TD8R
Thông Tin Bảo Hành
chính sách hoàn trả
Parts Diagrams
No EquipmentNhập số seri thiết bị hoặc chọn thiết bị từ danh sách đã thêm trước đó để xem sơ đồ bộ phận.
Chọn thiết bị
PhímPhím
Lắp tại nhà máy

Linh kiện này được thiết kế để lắp vừa thiết bị Cat của bạn dựa trên các thông số kỹ thuật của nhà sản xuất.

Mọi thay đổi so với cấu hình của nhà sản xuất có thể dẫn tới kết quả là sản phẩm không lắp vừa với thiết bị Cat của bạn. Vui lòng tham khảo Đại lý Cat của bạn trước khi thanh toán để đảm bảo rằng linh kiện này phù hợp với thiết bị Cat của bạn trong điều kiện hiện tại và cấu hình giả định của chúng. Chỉ số này không đảm bảo tính tương thích với tất cả các linh kiện.

Tái sản xuất

Không được trả lại

Bộ công cụ

Thay thế

Tái sản xuất

Không được trả lại

Bộ công cụ

Thay thế

Trò chuyện với một chuyên gia