Caterpillar

Velg utstyr

Velg utstyr for å se deler som passer til ditt utstyr.
Ingen foreslåtte resultater. Prøv igjen.

Registrer

Caterpillar

Velg utstyr

Legg til utstyr

for å finne deler som passer.for å finne deler som passer.
Søk etter delenummer eller -navn
HjemFesteutstyr, tetninger og forbruksdelerKoblingsbolter og hylselagreKoblingsbolter467-6679: BOLT
Hjem
Festeutstyr, tetninger og forbruksdelerKoblingsbolter og hylselagreKoblingsbolter
467-6679: BOLT
467-6679: BOLT

Cat® Linkage Pin 7.87" dia X 12.01" long

Merke: Cat

Produktbilder
467-6679: BOLT
467-6679: BOLT
467-6679: BOLT
467-6679: BOLT
467-6679: BOLT

Cat® Linkage Pin 7.87" dia X 12.01" long

Merke: Cat

Legg til utstyret ditt for å se om denne delen passer eller om det finnes tilgjengelige reparasjonsalternativer.
Passer den?Legg til utstyret ditt for å se om denne delen passer eller om det finnes tilgjengelige reparasjonsalternativer.
Legg til utstyr
Vil den passe eller vil du reparere? Legg til utstyret ditt for å se om denne delen passer eller om det finnes tilgjengelige reparasjonsalternativer.
Sjekk pris
Sjekk pris
Logg deg på for å vise kundeprisen
Garantiinformasjon
Returpolicy
Beskrivelse
Beskrivelse

Description:
Cat Machine Linkage Pins support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Attributes:
Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Advarsel:Dette produktet kan utsette deg for kjemikalier, inkludert bly og blyforbindelser, som etter hva delstaten California er kjent med, kan forårsake kreft og fødselsskader eller andre reproduksjonsskader. For mer informasjon gå til www.P65Warnings.ca.gov.

Description:
Cat Machine Linkage Pins support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Attributes:
Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Advarsel:Dette produktet kan utsette deg for kjemikalier, inkludert bly og blyforbindelser, som etter hva delstaten California er kjent med, kan forårsake kreft og fødselsskader eller andre reproduksjonsskader. For mer informasjon gå til www.P65Warnings.ca.gov.
Spesifikasjoner
Spesifikasjoner
MåleenheterUSMetrisk
Pin Type: Straight Pin
Material: Steel,Low Alloy Steel
Plating: Unplated
Pin Diameter (mm): 200
Pin Diameter (in): 7.874
Length (mm): 305
Length (in): 12.01
Removal Aid / Feature: Puller Hole
Pin Length (mm): 304.8
MåleenheterUSMetrisk
Pin Type: Straight Pin
Material: Steel,Low Alloy Steel
Plating: Unplated
Vis flere
Kompatible modeller
Kompatible modeller
Electric Rope Shovel
74957495 HF
Vis flere
Electric Rope Shovel
74957495 HF
Garantiinformasjon
Returpolicy
Delediagram for 467-6679
Vis detaljerte delediagrammer
Legg til ditt utstyr
DiagramBeskrivelseSpesifikasjonerKompatible modeller
Delediagram for 467-6679
Vis detaljerte delediagrammer
Legg til ditt utstyr
Beskrivelse av delenummer 467-6679

Description:
Cat Machine Linkage Pins support rotational movement between machine frames, linkages and work tools. They are found wherever rotation must occur between two structures. Genuine Cat Pins and Sleeve Bearings are specifically designed to operate as a system to deliver the performance you expect. Caterpillar design engineers match the right combination of dimensions, materials, heat treatment, surface treatments and finish to each part to enable them to work and wear effectively with all the other neighboring and dependent parts.

Attributes:
Cat Linkage Pins are machined from high grade steel bar and hardened for exceptional strength and wear life. They work as part of the pin joint system for your specific Cat machine and are tested and proven in the world's most severe applications. The surface hardness, finish and plating are selected for optimum performance with the sleeve bearing. They result in a lower overall cost, outstanding strength and fatigue life, superior resistance to abrasive wear, and exceptional protection against pin galling, even in high-load conditions.

Applications:
Cat Hardened Linkage Pins are designed for conditions that require superior load carrying capacity, strength and wear resistance for longer pin joint life. Cat Linkage Pins are the top choice for maximum performance in demanding applications. They are designed to match to the mating sleeve bearing.

Vis flere
Advarsel:Dette produktet kan utsette deg for kjemikalier, inkludert bly og blyforbindelser, som etter hva delstaten California er kjent med, kan forårsake kreft og fødselsskader eller andre reproduksjonsskader. For mer informasjon gå til www.P65Warnings.ca.gov.
Spesifikasjoner for delenummer 467-6679

Måleenheter

USMetrisk
Pin Type: Straight Pin
Material: Steel,Low Alloy Steel
Plating: Unplated
Pin Diameter (mm): 200
Pin Diameter (in): 7.874
Length (mm): 305
Length (in): 12.01
Removal Aid / Feature: Puller Hole
Pin Length (mm): 304.8
Vis flere
Kompatible modeller for delenummer 467-6679

ELECTRIC ROPE SHOVEL

7495 7495 HF

Vis flere
NøkkelNøkkel
Fabrikktilpasning

Denne delen er konstruert for å passe til Cat-utstyret ditt basert på produsentens spesifikasjoner.

Enhver endring i produsentens konfigurasjon kan føre til at produktet kanskje ikke passer til Cat-utstyret ditt. Snakk med Cat-forhandleren din før du handler for å sørge for at denne delen passer Cat-utstyret ditt i sin nåværende tilstand og antatte konfigurasjon. Denne indikatoren kan ikke garantere at alle delene er kompatible.

Nyprodusert

Ikke-returnerbar

Sett

Byttet

Nyprodusert

Ikke-returnerbar

Sett

Byttet

Chat med en ekspert