Home

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

Cat® Hydraulic control spring pin is a locking element used to position and secure springs within the hydraulic control.

Brand: Cat

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

Cat® Hydraulic control spring pin is a locking element used to position and secure springs within the hydraulic control.

Brand: Cat

Will It Fit?

Add your equipment to see if this part fits or if there are repair options available.

8T-0114

135-2274

510-0842

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

135-2274: Operator Control Pedal

510-0842: 12mm Diameter Rubber Pedal Stopper Pin

561-7005: Control Group-Pedal

498-7710: Cab Pilot Control Valve Pedal

498-7711: Foot Pedal Support

Description for part number 8T-0114

Description:
Slotted spring pin has a longitudinal slot down the entire length. Compressed as it is installed, the pin applies continuous pressure toward the sides of the hole wall. The pressure provides tension in a radial manner to prevent loosening created by vibration or shock. Fastener & hardware parts are designed for specific applications based on size, strength, clamp load, and past performance. This is information other manufacturers do not have. They are selected to last until rebuild or the life of the machine. While it may seem as though non-Cat hardware and fasteners are suitable for your machine, no other company knows your equipment like we do.

Attributes:
• Hardened steel pin
• Pin Diameter: 3 mm (0.12 in)
• Pin Length: 16 mm (0.63 in)
• End Type 1: Chamfer
• End Type 2: Chamfer

Application:
Consult your owner's manual or contact your local Cat Dealer for more information.

Warning:This product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specifications for part number 8T-0114

Units of Measure

Compatible Models for part number 8T-0114

TRUCK ENGINE

3116

INTEGRATED TOOLCARRIER

IT62G IT24F IT12B IT38G IT38F IT28G IT28F

MATERIAL HANDLER

MH3250 MH3260

MOTOR GRADER

120H 135H NA 120H NA 120H ES

WHEEL SKIDDER

535B 525B

TRACK-TYPE TRACTOR

D6GC

KNUCKLEBOOM LOADER

539

MINI HYD EXCAVATOR

308E CR 305.5E2 301.8 307D 307C 307B 301.6 301.5 307E 304SR 308E2CR 305.5E 308E 308C 305.5 GC 305.5 CR 308E2 CR 308E2 307E2 301.7CR 306E2 304CR 308.5 303CR 308 307.5 309 306 307 302CR 306.5 310 303.5CR 302.7CR 305 CR

ASPHALT PAVER

BG-240C AP-900B AP-1050B AP300F BG-260C BG-2455C AP-1000B AP-1050 AP355 AP-1055B AP-1000 AP300 AP355F BG-245C

MARINE ENGINE

3126 3116

MINING EXCAVATOR

5110B

LOG LOADR FORST MACH

558

FRONT SHOVEL

385C 5090B

EXCAVATOR

311D LRR 316F L 330 L 345B II 349D L 320-A L 325B L 312E 312F 320-A N 312B 336D 312C 324D 336E 312D 324E 336F 320D3 GC 375-A L 315D L 325-A 320D2 320D3 336D2 L 322B LN 314D CR 326D L 335F 323F 336F XE 374F L 311B 311C 323D 349E L 330D2 325C L 322B 322C 323D LN 385C FS 324E LN 352F XE VG 330B LN 321C 330D FM 345B 345C 321B 345D 336 MHPU 312B L 548 320D2 GC 349F L 385C L 325D L 316F 352F-VG 317 315 558 313 320D LRR 365C L MH 315B 315C 326F L 336D L 374D L 323F OEM 312D2 L 336F L XE 312C L 323E LN 350-A L 314E CR 330C FM 314C 326F 322-A 320 GX 538 325B 349D 324D L 350 L 313F 330GC 336E L 320 GC 325C 349E 325D 349F 313D 320E RR 325F 312D2 352F 312D L 340F 322B L 345B L 324D FM LL 330-A L 329D LN 314D LCR 336F LN XE 320E LRR 323F LN 318D2 L 324E L 336F L 374F 312E L 345C L 330 GC 325-A L 323D SA 320D RR 323D3 323D S 336D2 GC 323D L 313F L 322 L 330D2 L 323D2 326D2 L 314F CR 385B 385C 345D L 336F LNXE 320B 320C 320D 320E 314E LCR 365C L 323E L 336F LN 329E LN 323E SA 320E LN 320B S 320B N 330F 320B L 330B 330C 330D 390F L 323F L 320 L 317 GC 336D2 L XE 365B L 365C 320B U 365B 336E LN 320C L 336E LH 349F LXE 336D2 LXE 323F SA 320D LN 340D2 L 312F GC 313D2 GC 390D 318B N 390F 320D L 320D FM RR 350-A 315 GC 390D L 336D LN 319D LN 340MHPU 325C FM 340F L UHD 349E L VG 330B L 349 GC 320E L 325D FM 325B LN 320D GC 326D2 349D2 319D L 323D2 L 325 L 330C L 336D2 318D L 320F L 568 FM 313D2-GC 313D2 320B LU 326GC 320D FM 313D2 LGP 317B L 330F LN 330D L 350 OEM 322-A L 352 UHD 312D2 GC 318E L 340 349 330D MH 336 GC 345 328D LCR 313 GC 329D L 324D FM 340F L LRE 349D2 L 352 350 325F LCR 355 319D 330D LN 319C 568 FM LL 318F L 320 326 325 323 318C 329E L 318F 319 318B 345D L VG 320-A 330 340D L 335 336 311F LRR 329D 330F L 329E 330-A 317B LN 329F L 336D2 XE 335F LCR 330C LN 315B L 395 321D LCR 375-A 316E L 315F LCR 365B II 329D2 L 322C FM 320D2 L 324D LN 374 329D2 326F LN 345 GC

VIBRATORY COMPACTOR

CP-533C CS-531D CS-531C CS-533C CP-563D CP-563C CB-536D CB-634C CB-634D CS-583C CS-583D CS-573D CS-563C CS-563D

MOBILE HYD POWER UNIT

329D L 385C 323D LN 350MHPU 323F OEM 390F 330FMHPU 385C L 329E 340D2 L 336D L 330 MHPU 349E L HVG 325D L 325D 336D 345C 336E HVG 330D 330C 323D L 345C L

GENERATOR SET

3512 3512B

WHEEL TRACTOR

613C II

COMBINE HARVESTER

460

ENGINE

3126

BACKHOE LOADER

446D 446B

COLD PLANER

PM312 PM313 PM310

WHEEL LOADER

960F 972G 950G 962G 966G 950GC 924F 938G 938F 928G 966 GC 980GC 950 GC 950F II

CHALLENGER

55 65 65B 35 45

INDUSTRIAL TRACTOR

TK381 TK371

ENGINE - MACHINE

3116 3114

ARTICULATED TRUCK

D44B D35HP D30C D35C D250B D25C D350C D300B D400

COMBINE

470 465 460

WHEELED EXCAVATOR

M325B

INDUSTRIAL ENGINE

3126 3116

WHEEL FELLER BUNCHER

TK370 TK380 543 533

WHEEL SCRAPER

613C

LOGGER

322C

Key

Factory Fit

This part is designed to fit your Cat equipment based on the manufacturer’s specifications.

Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.

Remanufactured

Non-Returnable

Kit

Replaced

Remanufactured

Non-Returnable

Kit

Replaced

To find the parts that fit.

To find the parts that fit.

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

8T-0114: 3mm Diameter Hydraulic Control Spring Pin

Will It Fit?

Add your equipment to see if this part fits or if there are repair options available.

8T-0114

135-2274

510-0842

This part:

This part:

This part:

This part:

This part:

This part:

Description for part number 8T-0114

Specifications for part number 8T-0114

Material Description:

Steel

Pin Outside Diameter (in):

0.118

Pin Length (in):

0.63

Length (in):

0.63

Material:

Low Alloy Steel, Carbon Steel

Pin Diameter (in):

0.12

Pin Type:

Spring-roll

Compatible Models for part number 8T-0114

Key

Key

Factory Fit

Find Parts

Support

My Account

Cat Social

Find Parts

Support

My Account

Cat Social

Language

CAT Sites

Will It Fit?

Add your equipment to see if this part fits or if there are repair options available.

Description for part number 8T-0114

Specifications for part number 8T-0114

Material Description:

Steel

Pin Outside Diameter (in):

0.118

Pin Length (in):

0.63

Length (in):

0.63

Material:

Low Alloy Steel, Carbon Steel

Pin Diameter (in):

0.12

Pin Type:

Spring-roll

Compatible Models for part number 8T-0114

Parts diagram for 8T-0114

View Detailed Parts Diagrams

8T-0114

135-2274

510-0842

This part:

This part:

This part:

This part:

This part:

This part:

Frequently bought together

Frequently bought together