This part is designed to fit your Cat equipment based on the manufacturer’s specifications.
Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.
Remanufactured
Non-Returnable
Kit
Replaced
Remanufactured
Non-Returnable
Kit
Replaced
Chat with an expert
Will It Fit?Add your equipment to see if this part fits or if there are repair options available.
Add Equipment
Will it fit or looking for a repair?Add your equipment to see if this part fits or if there are repair options available.
Description
Description
Description: Isolation mounts are used to attach and position systems, accommodate displacement, and isolate components from the surrounding structure (vibration, shock, noise).
Two-Piece Mounts are extremely versatile and are available in symmetrical (two mounts) and non-symmetrical (mount plus pad) designs. They are installed into a bore on a support plate, and are bolted through a center sleeve, which may be bonded or loose.
Attributes: Cat® Mounting Systems are designed to reduce stress and strain on mounted components to increase their durability and performance life, and to contribute to operator comfort. The entire system (mount design, material selection, placement, hardware, etc.) is optimized and validated to meet specific application requirements.
Two-Piece Mounts are finely tuned to the specific application through rubber composition and design geometry. The mounts are typically precompressed to offer long service life.
Applications: Two-piece Mounts are used in a wide variety of Cat system installations, including engines, transmissions, aftertreatment systems, electronics, cabs and HVAC systems, hydraulic components, and structures.
Warning:This product can expose you to chemicals including Arsenic, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: Isolation mounts are used to attach and position systems, accommodate displacement, and isolate components from the surrounding structure (vibration, shock, noise).
Two-Piece Mounts are extremely versatile and are available in symmetrical (two mounts) and non-symmetrical (mount plus pad) designs. They are installed into a bore on a support plate, and are bolted through a center sleeve, which may be bonded or loose.
Attributes: Cat® Mounting Systems are designed to reduce stress and strain on mounted components to increase their durability and performance life, and to contribute to operator comfort. The entire system (mount design, material selection, placement, hardware, etc.) is optimized and validated to meet specific application requirements.
Two-Piece Mounts are finely tuned to the specific application through rubber composition and design geometry. The mounts are typically precompressed to offer long service life.
Applications: Two-piece Mounts are used in a wide variety of Cat system installations, including engines, transmissions, aftertreatment systems, electronics, cabs and HVAC systems, hydraulic components, and structures.
Warning:This product can expose you to chemicals including Arsenic, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: Isolation mounts are used to attach and position systems, accommodate displacement, and isolate components from the surrounding structure (vibration, shock, noise).
Two-Piece Mounts are extremely versatile and are available in symmetrical (two mounts) and non-symmetrical (mount plus pad) designs. They are installed into a bore on a support plate, and are bolted through a center sleeve, which may be bonded or loose.
Attributes: Cat® Mounting Systems are designed to reduce stress and strain on mounted components to increase their durability and performance life, and to contribute to operator comfort. The entire system (mount design, material selection, placement, hardware, etc.) is optimized and validated to meet specific application requirements.
Two-Piece Mounts are finely tuned to the specific application through rubber composition and design geometry. The mounts are typically precompressed to offer long service life.
Applications: Two-piece Mounts are used in a wide variety of Cat system installations, including engines, transmissions, aftertreatment systems, electronics, cabs and HVAC systems, hydraulic components, and structures.
View More
Warning:This product can expose you to chemicals including Arsenic, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications for part number 6Y-9960
Units of Measure
USMetric
Head Outside Diameter (mm): 13
Pilot Outside Diameter (mm): 7.2
Mount Height (in): 3.31
Bolt Type: M24
Inside Diameter (mm): 26.8
Head Outside Diameter (in): 5.12
Pad Height (mm): 25
Head Thickness (mm): 31.5
Pilot Outside Diameter (in): 2.76
Head Thickness (in): 1.24
Bonded Sleeve: No
Inside Diameter (in): 1.05
Pad Height (in): 0.98
Mount Height (mm): 84
Material Description: Rubber
Standard Bolt Size (mm): M24
Mount Type: Two-Piece - Non-Symmetric
Mounting Type: Two-Piece-Non-Symmetric
View More
Compatible Models for part number 6Y-9960
UNDERGROUND ART TRUCK
AD22 AE40 AD55B AD60 AD63 AE40 II AD45 AD40
INTEGRATED TOOLCARRIER
IT18F IT28F
LOAD HAUL DUMP
R2900
OFF HIGHWAY TRUCK
777 773 777E
OEM SOLUTIONS
3412C
MOTOR GRADER
18M3 120H 16 14 18 120M 120K 12M 3 AWD 135H 160H ES 12H NA 16M 163H 120H ES 160 140M 140K 140H 14L 140H NA 150 14M 140K 2 160M 3 AWD 140 143H 16GC 12H 12M 12K 14M3 12M 3 12M 2 120 160K 160H 160M 140M 3 AWD 140M 3 140M 2 160H NA 16M3 14M-3 135H NA 12H ES 163H NA 160M 2 160M 3 120H NA 140H ES 120K 2
HYDRAULIC SHOVEL
6015 6040 6030 6015B
WHEEL SKIDDER
545 535C 535B 545C 525C 525B
UNDERGROUND ARTICULATED TRUCK
AD22
STABILIZER MIXER
SM-350
MINING EXCAVATOR
5230B 5110B 5130 5230 5130B
PETROLEUM PACKAGE
TH55
SHOVEL
6040
GENERATOR SET
DE1400 D1250 DE1000S D1000 DE1250S D800 C15 GEN SE C13GENSET C18 I6 DE1250 C18 C15 C15 I6 DE1500
