Track Components
Track Components
1 - 16 of 1200 results
1 - 16 of 1200 results
380-5940: Track Group
Cat® Track Group 1 Tooth Master, Single Grouser, 44 Sections, PPR, SALT, SES, 610mm Shoe Width, 260.4mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
5.315
Rotating Bushing Track (Rbt)
No
Track Pitch (in)
10.25
Pin Retention System
Ppr
UC System
HD, HD
ARM
No
Shoe Width (in)
24.016
Number of Sections
44
Track Bolt Thread
1.125
Number of Grousers
Single
Clipped
No
Wear Sensor
No
Master Bolt Thread
1.125
Bushing Inside Diameter (in)
3.74
Shoe Type
Ses
Seal And Lube Type
SALT
Master Link Type
1 Tooth Master
533-6299: Track Shoe
Cat® Track Shoe 500mm Wide, Regular Joint, Rubber Pad
Cat
Shoe Type
Rubber Pad
UC System
GD, HD
ARM
No
Joint Type
Regular
Shoe Width (in)
19.685
Plate Thickness (in)
1.969
Track Bolt Thread
M16
Bolt Hole Diameter (in)
0.709
Clipped
No
651-9069: Link Assembly
Cat® Link Assembly 5 Tooth Master, 44 Sections, PPR, SALT, 215.9mm Track Pitch, Wear Sensor
Cat
Link Inside Spread Sprocket (in)
3.905
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr
Link Inside Spread Roller (in)
4.35
UC System
HD, HD
Rail To Bushing OD (in)
1.697
Shoe Bolt Hole Spacing A (in)
2.48
Number of Sections
44
Bushing OD (in)
3.297
Link Outside Spread (in)
9.024
Shoe Bolt Hole Spacing B (in)
5.752
Bolt Hole Diameter (in)
0.914
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
Track Pitch (in)
8.5
Rail To Pin Boss OD (in)
1.992
Track Bolt Thread
0.875
Shoe Bolt Hole Spacing C (in)
8.035
Pin Length (in)
9.653
Link Height (in)
5.906
Wear Sensor
Yes
Master Bolt Thread
0.875
380-5946: Link Assembly
Cat® Link Assembly 1 Tooth Master, 44 Sections, PPR, SALT, 260.4mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.921
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr
UC System
HD, HD
Link Inside Spread Roller (in)
5.551
Rail To Bushing OD (in)
2.264
Shoe Bolt Hole Spacing A (in)
3.15
Number of Sections
44
Bushing OD (in)
3.74
Link Outside Spread (in)
11.496
Shoe Bolt Hole Spacing B (in)
7.48
Bolt Hole Diameter (in)
1.164
Seal And Lube Type
SALT
Master Link Type
1 Tooth Master
Track Pitch (in)
10.252
Rail To Pin Boss OD (in)
2.362
Track Bolt Thread
1.125
Shoe Bolt Hole Spacing C (in)
9.843
Pin Length (in)
11.974
Link Height (in)
7.126
Wear Sensor
No
Master Bolt Thread
1.125
563-8470: Track Group
Cat® Track Group 1 Tooth Master, Single Grouser, 41 Sections, PPR, SALT, ES, 810mm Shoe Width, 317.5mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.646
Track Shoe Hole Type
Not Applicable
Number of Track Sections
41.0
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr
UC System
HDXL, HDXL
ARM
No
Shoe Width (in)
31.89
Number of Sections
41
Hole Type
Not Applicable
Grease Track Type
Not Applicable
Bushing Inside Diameter (in)
4.488
Seal And Lube Type
SALT
Shoe Type
Es
Master Link Type
1 Tooth Master
Track Pitch (in)
12.5
Offset
Not Applicable
Track Bolt Thread
1.375
Number of Grousers
Single
Clipped
No
Wear Sensor
Yes
Track Stiffening System
Not Applicable
Master Bolt Thread
M36
650-3498: Link Assembly
Cat® Link Assembly 5 Tooth Master, 45 Sections, PPR2, SALT, 202.81mm Track Pitch, Wear Sensor
Cat
Link Inside Spread Sprocket (in)
3.516
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
UC System
HDXL, HDXL
Link Inside Spread Roller (in)
4.035
Rail To Bushing OD (in)
1.638
Shoe Bolt Hole Spacing A (in)
2.677
Number of Sections
45
Link Outside Spread (in)
7.205
Shoe Bolt Hole Spacing B (in)
5.405
Bushing OD (in)
2.864
Bolt Hole Diameter (in)
0.802
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
Track Pitch (in)
7.985
Rail To Pin Boss OD (in)
1.839
Track Bolt Thread
M20
Shoe Bolt Hole Spacing C (in)
7.295
Pin Length (in)
9.894
Link Height (in)
5.197
Wear Sensor
Yes
Master Bolt Thread
M22
569-2542: Track Group
Cat® Track Group Press Fit Master, Single Grouser, 44 Sections, PPR, SALT, SES, 610mm Shoe Width, 261mm Track Pitch
Cat
Shoe Type
Ses
Track Pitch (in)
10.25
Shoe Width (in)
24.016
Link Inside Spread Sprocket (in)
5.315
Track Shoe Hole Type
Not Applicable
Number of Track Sections
44.0
Rotating Bushing Track (Rbt)
No
Pin Retention System
Press Fit
UC System
HDXL, HDXL
ARM
No
Number of Sections
44
Hole Type
Not Applicable
Grease Track Type
Not Applicable
Bushing Inside Diameter (in)
3.899
Seal And Lube Type
SALT
Master Link Type
1 Tooth Master
Bolt Size (in)
1-1/8
Offset
Not Applicable
Track Bolt Thread
1.125
Number of Grousers
Single
Clipped
No
Wear Sensor
No
Track Stiffening System
Not Applicable
Master Bolt Thread
1.125
625-7303: Link Assembly
Cat® Link Assembly 5 Tooth Master, 44 Sections, PPR2, SALT, 215.9mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
3.862
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
UC System
GD, GD
Link Inside Spread Roller (in)
4.142
Rail To Bushing OD (in)
1.709
Shoe Bolt Hole Spacing A (in)
2.48
Number of Sections
44
Bushing OD (in)
3.117
Link Outside Spread (in)
9.327
Shoe Bolt Hole Spacing B (in)
5.752
Bolt Hole Diameter (in)
0.914
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
Track Pitch (in)
8.5
Rail To Pin Boss OD (in)
1.858
Track Bolt Thread
0.875
Shoe Bolt Hole Spacing C (in)
8.035
Pin Length (in)
9.823
Link Height (in)
5.827
Wear Sensor
No
Master Bolt Thread
0.875
380-5938: Track Group
Cat® Track Group 1 Tooth Master, Single Grouser, 44 Sections, PPR, SALT, ES, 610mm Shoe Width, 260.4mm Track Pitch
Cat
Shoe Type
Es
Track Pitch (in)
10.25
Shoe Width (in)
24.016
Link Inside Spread Sprocket (in)
5.315
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr
UC System
HD, HD
ARM
No
Number of Sections
44
Track Bolt Thread
1.125
Number of Grousers
Single
Clipped
No
Wear Sensor
No
Master Bolt Thread
1.125
Bushing Inside Diameter (in)
3.74
Seal And Lube Type
SALT
Master Link Type
1 Tooth Master
609-0880: Link Assembly
Cat® Link Assembly GLT, Press Fit Master, 52 Sections, PPR2, SALT, 215.9mm Track Pitch
Cat
Track Pitch (in)
8.5
Link Inside Spread Sprocket (in)
3.703
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
UC System
HD, HD
Link Inside Spread Roller (in)
4.342
Rail To Bushing OD (in)
1.313
Shoe Bolt Hole Spacing A (in)
3
Number of Sections
52
Link Outside Spread (in)
7.983
Shoe Bolt Hole Spacing B (in)
5.75
Bushing OD (in)
2.891
Bolt Hole Diameter (in)
0.984
Grease Track Type
GLT
Seal And Lube Type
SALT
Master Link Type
Press Fit Master
Rail To Pin Boss OD (in)
1.535
Track Bolt Thread
M24
Pin Length (in)
9.805
Shoe Bolt Hole Spacing C (in)
7.25
Link Height (in)
5.081
Wear Sensor
No
Master Bolt Thread
M24
650-3499: Link Assembly
Cat® Link Assembly 5 Tooth Master, 46 Sections, PPR2, SALT, 202.81mm Track Pitch, Wear Sensor
Cat
Link Inside Spread Sprocket (in)
3.516
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
UC System
HDXL, HDXL
Link Inside Spread Roller (in)
4.035
Rail To Bushing OD (in)
1.638
Shoe Bolt Hole Spacing A (in)
2.677
Number of Sections
46
Bushing OD (in)
2.864
Shoe Bolt Hole Spacing B (in)
5.405
Link Outside Spread (in)
7.205
Bolt Hole Diameter (in)
0.802
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
Track Pitch (in)
7.985
Rail To Pin Boss OD (in)
1.839
Track Bolt Thread
M20
Shoe Bolt Hole Spacing C (in)
7.295
Pin Length (in)
9.894
Link Height (in)
5.197
Wear Sensor
Yes
Master Bolt Thread
M22
542-4530: Link Assembly
Cat® Link Assembly GLT4, Press Fit Master, 51 Sections, PPR2, SALT, 260.35mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.787
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
Link Inside Spread Roller (in)
5.087
UC System
HD, HD
Rail To Bushing OD (in)
1.512
Shoe Bolt Hole Spacing A (in)
3
Number of Sections
51
Link Outside Spread (in)
10.567
Bushing OD (in)
3.473
Shoe Bolt Hole Spacing B (in)
7.248
Bolt Hole Diameter (in)
1.22
Grease Track Type
GLT4
Seal And Lube Type
SALT
Master Link Type
Press Fit Master
Track Pitch (in)
10.25
Rail To Pin Boss OD (in)
1.783
Track Bolt Thread
M30
Pin Length (in)
12.165
Shoe Bolt Hole Spacing C (in)
9.248
Link Height (in)
6.126
Wear Sensor
No
Master Bolt Thread
M30
641-9532: Track Group
Cat® Track Group 5 Tooth Master, Single Grouser, 44 Sections, PPR2, SALT, ES, 560mm Shoe Width, 215.9mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.141
Number of Track Sections
44.0
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr2
Track Pitch (in)
8.5
UC System
GD, GD
ARM
No
Number of Sections
44
Shoe Width (in)
22.047
Track Bolt Thread
0.875
Number of Grousers
Single
Clipped
No
Grease Track Type
GLT4
Wear Sensor
No
Bushing Inside Diameter (in)
3.117
Shoe Type
Es
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
570-3242: Track Group
Cat® Track Group 1 Tooth Master, Single Grouser, 41 Sections, PPR, SALT, ES, 710mm Shoe Width, 317.5mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.646
Rotating Bushing Track (Rbt)
No
Pin Retention System
Ppr
Track Pitch (in)
12.5
UC System
HDXL, HDXL
ARM
Yes
Number of Sections
41
Shoe Width (in)
27.953
Track Bolt Thread
1.375
Number of Grousers
Single
Clipped
No
Wear Sensor
Yes
Master Bolt Thread
M36
Bushing Inside Diameter (in)
4.488
Seal And Lube Type
SALT
Shoe Type
Es
Master Link Type
1 Tooth Master
590-2864: Link Assembly
Cat® Link Assembly GLT, Clamp Master, 45 Sections, Press Fit, SALT, 190mm Track Pitch
Cat
Track Pitch (in)
7.48
Link Inside Spread Sprocket (in)
3.276
Rotating Bushing Track (Rbt)
No
Pin Retention System
Press Fit
UC System
GD
Link Inside Spread Roller (in)
3.815
Rail To Bushing OD (in)
1.087
Shoe Bolt Hole Spacing A (in)
2.717
Number of Sections
45
Shoe Bolt Hole Spacing B (in)
4.732
Bushing OD (in)
2.312
Link Outside Spread (in)
6.657
Bolt Hole Diameter (in)
0.827
Grease Track Type
GLT
Seal And Lube Type
SALT
Master Link Type
Clamp Master
Rail To Pin Boss OD (in)
1.205
Track Bolt Thread
M20
Shoe Bolt Hole Spacing C (in)
6.15
Pin Length (in)
7.992
Link Height (in)
4.055
Wear Sensor
No
Master Bolt Thread
M20
641-9533: Track Group
Cat® Track Group 5 Tooth Master, Single Grouser, 44 Sections, PPR2, SALT, ES, 610mm Shoe Width, 215.9mm Track Pitch
Cat
Link Inside Spread Sprocket (in)
4.141
Number of Track Sections
44.0
Rotating Bushing Track (Rbt)
No
Track Pitch (in)
8.5
Pin Retention System
Ppr2
UC System
GD, GD
ARM
No
Weight (lb)
5,742.206
Shoe Width (in)
24.016
Number of Sections
44
Track Bolt Thread
0.875
Number of Grousers
Single
Clipped
No
Grease Track Type
GLT4
Wear Sensor
No
Bushing Inside Diameter (in)
3.117
Shoe Type
Es
Seal And Lube Type
SALT
Master Link Type
5 Tooth Master
Key
Key
Factory Fit
This part is designed to fit your Cat equipment based on the manufacturer’s specifications.
Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.
Remanufactured
Non-Returnable
Kit
Replaced
In Cat® excavators, dozers, and compact track loaders (CTLs), key Cat undercarriage track components include:
Track Groups: Complete track assemblies for motion and support
Track Links: Connect track shoes and transfer drive force
Track Segments: Engage with sprockets to drive the track
Linkage Assemblies: Guide and stabilize track movement
Other Miscellaneous parts
Benefits:
- Ensure smooth, stable machine movement
- Provide reliable traction and power transfer
- Maintain track alignment and reduce wear
- Extend undercarriage life and reduce downtime
- Support heavy loads and tough terrain conditions
Why Buy Track Component Parts from Caterpillar?
Cat track components are built for precision, strength, and long-term reliability, ensuring your undercarriage performs at its best in any environment.
Why Choose Cat®:
- Exact fit for Cat® machines ensures optimal performance
- Heavy-duty materials resist wear, impact, and corrosion
- Engineered for durability in high-stress applications
- Lower maintenance costs through extended service life
- Global support with trusted warranty and parts availability
Bottom Line: Cat® track component parts keep your machine moving efficiently and reliably, delivering maximum productivity, uptime, and confidence on any jobsite.
