Cat® LED Group Replacement Kit-Signal Lamp Assembly

Kit provides one counterweight per side which increases the Rated Operating Capacity by approximately 46-57 kg (100-125 lbs), depending on model. For maximum ROC increase, must order a quantity of two.

Cat® EMCP 4.4 Panel

CPI (#502459) to address a smart wastegate resonance mode of the Turbocharger and redesigns for a shorter actuator rod

Kit provides one counterweight per side which increases the Rated Operating Capacity for increased stability. Includes mounting hardware. Cannot be used with Heavy-Duty Rear Bumper Kit.

CAT Onboard Printer (Serial Thermal Printer) Kit. Printer is used to print data from the payload monitoring system. Kit includes printer, mounting hardware, and connecting harness.

Centrifugal oil filter upgrade kit for C175-16 engines.

Extra Counterweight adds more stability and 6 inches (152 mm) more overhang. Kit includes – Extra Counterweight 550 lbs (250 kg) and Hardware.

Cat® EMCP 4.3 Panel

Extra Counterweight adds more stability and 3 inches (76 mm) more overhang. Kit includes extra counterweight (530 lbs / 240 kg) and hardware.

3 GEAR TO 6 GEAR TO BE USED IN CONJUNCTION WITH OVERHAUL. Convert A TH55FT- E70 Petroleum Transmission Into A TH55FT- E90 Petroleum Transmission

Upgrade: Optional replacement for standard magnetic plugs. These self sealing mag plugs will help avoid live work and reduce time to service. See PEJJ0357 and M0122723 at publications.cat.com

Extra counterweight adds more stability and 8.0 inches (208 mm) more overhang. Kit includes counterweight(1102 lb/500kg) and hardware.

CPI (#502459) to address a smart wastegate resonance mode of the Turbocharger and redesigns for a shorter actuator rod

Cat® Electronic Modular Control Panel Series 4 Upgrades are a field-installed electronics based aftermarket solution for genset controls for non-current or obsolete equipment, including EMCP 2.x or 3.x genset controllers.

Roof mounted auxiliary hydraulic cooler provides additional hydraulic cooling capacity. For use in heavy duty applications (i.e. mulching, brush cutting, etc.) where the machine is utilized continuously in XE mode.